Electro-Voice

The Electro-Voice EBK-1 Eyebolt Attachment Kit contains three shoulder eyebolts, along with three fender washers for load distribution, which attac...

Broadcast orientation suspension shock mount for RE20, RE27N/D, and RE320 microphones. Black. Optional item.

Electro-Voice 314E Windscreen for 635A

Quick-disconnect "soft" stand adapter for 1" diameter microphones - including RE50 and tapered mics - N/D967, 767a, 267a, 367s, RE410 and RE510. Op...

Electro-Voice 376 Windscreen

The compact EVID 4.2 delivers very full range sound from its dual 4-inch LF drivers and a 1-inch titanium tweeter with waveguide. It is able to del...

The compact EVID 4.2 delivers very full range sound from its dual 4-inch LF drivers and a 1-inch titanium tweeter with waveguide. It is able to del...

The 635A/B live interview wired microphone is the most popular news gathering mic in the world. It delivers great sound and is known as "The Buchan...

The world-reknown performance of legendary 635A is available in the long-handle 635L. Measuring 9.5" , this extended handle length version delivers...

The world-reknown performance of legendary 635A/B is available in the long-handle 635L/B. With its black finish, and measuring 9.5" , this extended...

The Electro-Voice 635N/D-B dynamic omni directional microphones is offspring of the legendary 635A microphone. Built with the same rugged design of...

Model 850T is a wide-range, integrated horn and driver system with a single driver unit having two coaxial horns coupled to opposite sides of the d...

The 920-8B loudspeaker system is a two-way loudspeaker with a 12" (30.5 cm), low-frequency cone and coaxially mounted, high-temperature voice-coil ...

The AB-2 is a universal mounting bracket for use with FA-XX and CLA-X ground-independent half-wave antennas. Includes 10-foot coax cable.

Electro-Voice AC Adapter - 120 V AC Input - 15 V DC Output Good power efficiency and comparatively light weight Delivers 15 V DC to ensure that yo...

Extends system range Switchable 3 dB and 10 dB of active gain Mounts on standard threaded microphone stand The ALPA is an active directional ante...

Electro-Voice AN-SFLEX A Antenna - 636 MHz to 726 MHz - Wireless Microphone Receiver - Green

Electro-Voice AN-SFLEX-YEL Antenna - 556 MHz to 636 MHz - Wireless Microphone Receiver - Yellow

The UAA-500 is a broadband UHF amplifier with selectable 3 dB and 10 dB amplification settings. Antenna signal amplifiers are used to make up for l...

Electro-Voice ANU-14 Antenna - Range - UHF - 600 MHz to 746 MHz

Electro-Voice Audio Control Device

Electro-Voice Belt Clip - for Bodypack Transmitter

Electro-Voice Beltclip for bp-300 bodypack - for Microphone

Electro-Voice Bodypack Set, for Ref Switch 488-524MHz - 488 MHz to 524 MHz Operating Frequency

Electro-Voice Bodypack Set, for Ref Switch 560-596MHz - 560 MHz to 596 MHz Operating Frequency

Electro-Voice Bodypack Set, for Ref Switch 653-663MHz - 653 MHz to 663 MHz Operating Frequency

Electro-Voice Bolt - Eyebolt - 3 Pack

The BP2-Clip is a flat beltclip for the BPU-2, and the WT-500 transmitter. The BP2-Clip offers an alternative mounting style to the standard swivel...

Electro-Voice BPU-2 Wireless Bodypack Microphone Transmitter - 648 MHz to 676 MHz Operating Frequency - 50 Hz to 15 kHz Frequency Response

Electro-Voice Brackets Mounting Bracket for Loudspeaker Designed for EKX-10P Loudspeakers Quick, Easy and Secure Installation Heavy-Duty Construct...

Perfect for conventional rooms. It has excellent bandwidth in an esthetically very unobtrusive installation profile. Its compact design fits in tig...

The EVID C8.2HC is a two-way, pattern-control, ceiling speaker system ideal for high-ceiling, reverberant, "problem" rooms. Its exclusive, ported, ...

The EVID C8.2/C8.2LP, with its specially tuned enclosure, and 8" woofer, the speaker system provides amazing bass response. The 1" waveguide-couple...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without co...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without co...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without ...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without ...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without ...

Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without co...

The WP-WT is a leather pouch for REV-WT and WTU-2 bodypack transmitter. A clear window in the front allows the LCD screen to show through and the ...

Electro-Voice Carrying Case (Roller) Electro-Voice Subwoofer, Loudspeaker - Black - Dust Resistant, Moisture Resistant, Scratch Resistant - Nylon B...

Electro-Voice Carrying Case Speaker - Nylon Body - 17.8" Height x 11.1" Width x 10.3" Depth The carrying case has smart support to keep your devic...

Model 848AT is a wide-range, integrated horn and driver system with a single driver unit having two coaxial horns coupled to opposite sides of the ...

50 foot, 50 ohm low loss bnc coax cable Premium ultra-low-loss coax cable 50 ohm Robust male BNC connectors The CXU50 is an ultra-low loss, premi...

The Cobreflex IIB is an exponentially flared, reflex design for use in public address, paging, and voice warning systems. This reflex construction ...

The FC100 is a compound diffraction horn comprising two sections for use with 1828 or 1829 Series drivers. The folded construction of the rear horn...

The weather-resistant PA430 series features a 60 degree x 40 degree dispersion pattern, and an integral swivel bracket. The PA430 is available in e...

Electro-Voice Drum Rim Clamp for PL35 Tom/Snare Microphone